Jetta L4-2.0L (BEV) (2004)
/Page-1303001.png)
Accelerator Pedal Position Sensor: Service and Repair
Electronic Power Control (EPC) system
1. Mounting
2. Connector
^
- Black, 6-pin
3. 10 Nm
4. Throttle Position (TP) sensor -G79- and
^
Sender -2- for accelerator pedal position - G185
^
In vehicles with an automatic transmission kick down switch point must be learned again when sensor is replaced.
^
When removing remove cover under instrument panel
5. Bracket
^
For footwell cover
^
Clipped onto accelerator pedal
