Jetta L4-2.0L (BEV) (2004)
Power Trunk / Liftgate Lock Switch: Service and Repair
Micro-Switch, Removing and Installing (Sedan)
Micro-switch, Removing And Installing
Removing
-
Removing and installing lock cylinder housing - 2 -.
-
Release catches at micro-switch - 1 -.
To do so, press catches downward - arrow -.
-
Disengage catches - arrows - of micro-switch - 1 - from lock cylinder housing - 2 -.
-
Remove micro-switch - 1 - from lock cylinder - 2 -.
Installing
-
Secure wires - 1 - and - 2 - in retaining profile - arrow - of micro-switch - 3 -.