Jetta L4-2.0L (BEV) (2004)
Tie Rod: Testing and Inspection
Tie rods, modified
The tie rod rods have been shortened.
Vehicle identification number, introduction; Tie rod ball joints, modified
Tie rod dimensions
^
Previous tie rod; dimension - a - 343.1 mm (13.508 inch)
^
New tie rod; dimension - a - 318.9 mm (12.555 inch)
Note: A mixed installation of previous and new tie rods are not permitted!
Security and boots on tie rod ends, checking play
-
With vehicle raised (wheels hanging free), check play by moving tie rods and wheels. Play: Zero play
-
Check mountings.
-
Check boots are not damaged and are seated correctly.
Center position on rack, determining
Rack should be positioned in center position before installing power steering gear.
-
Slide rack until dimension - a - is achieved.
Measure - a - = 30.5 mm (1.201 inch