Jetta L4-2.0L (BEV) (2004)
Shifter M/T: Adjustments
5 Speed Manual 02J
Gear selector mechanism from 05.99, adjusting
Special tools and equipment required
-
T10027 Pin
Note: The following points are essential to ensure correct selector adjustment:
-
Moving parts of selector mechanism and transmission elements must be in proper condition.
-
Selector mechanism must move freely.
-
The transmission, clutch and clutch mechanism must also be in proper condition.
-
Transmission in neutral position.
-
Secure locking mechanism on gear selector cable and gate selector cable by pulling forward until stop (arrow -1-) and then turning to left to lock
(arrow -2-).
Set selector shaft as follows:
-
Press selector shaft down (direction of arrow -1 -).
-
Turn right-angle piece -A- in direction of arrow -2- when pressing selector shaft down.