Jetta V6-2.8L (AFP) (1999)
Lower Side Moulding / Trim: Service and Repair
Assembly Overview
1
-
Front door protective side molding
-
Left and right-hand protective side moldings have different hole patterns
-
Self-adhesive
-
Material: PP/EPDM
-
The locating tabs -3- and -4- position the moldings
2
-
Pins
-
Stop twisting of molding
3
-
Locating tab
4
-
Locating tab
5
-
Pins
-
Stop twisting of molding
6
-
Rear door protective side molding
-
Left and right-hand protective side moldings have different hole patterns
-
Self-adhesive
-
Material: PP/EPDM
-
The locating tabs -3- and -4- position the moldings
7
-
Protective foil
Replacing
-
Warm side protective molding with hot air blower before removing.
-
Clean exterior panels with solvent, treat with silicone remover and then rub dry.
-
Pull protective foil from back of molding and attach molding lightly. Press molding on forcefully.
NOTE: The working temperature when attaching the moldings must be approx. 20 °C (68 °F).