Jetta V6-2.8L (AFP) (1999)
Brake Pad: Service and Repair
Front Brakes
Brake Pads, Removing And Installing
Special Tools And Equipment Required
^
VAG 1331 Torque wrench or equivalent
^
Piston resetting tool
Removing
Note:
^
If reusing brake pads mark location and fit in same position when installing otherwise uneven braking!
-
Remove protective caps (arrows).
-
Using a screwdriver, pry brake pad retaining spring out of brake caliper housing (arrow) and remove.
-
Remove both guide pins (arrows) from brake caliper.
-
Remove brake caliper housing and secure with wire so that weight of brake caliper does not stress or damage brake hose.
-
Remove brake pads from brake caliper housing or from brake carrier.
-
Clean brake caliper housing, especially bonding surface for brake pad. Surfaces must be free of adhesive or grease residue.
Installing