Jetta V6-2.8L (AFP) (1999)
-
Unscrew coolant pump securing bolts -1- and remove coolant pump -2
Note:
To remove the coolant pump, push the engine to one side using a over if necessary.
Installing
Install in reverse sequence; note the following points:
-
Moisten new O ring with coolant.
-
Insert coolant pump into cylinder block and tighten securing bolts to 20 Nm.
-
Fit pulley and tighten securing bolts to 15 Nm (11 ft lbs).
-
Align engine assembly mountings.
Note:
Torque settings for assembly mountings.
-
Install ribbed belt See: Drive Belts, Mounts, Brackets and Accessories/Ribbed Belt/Service and Repair
-
Fill with coolant See: Cooling System/Coolant/Service and Repair