Jetta V6-2.8L (AFP) (1999)
-
Press -> button.
-
Press buttons -0- and -6- to select "End Output" function 06 and press -Q- button to confirm input.
-
Switch ignition off.
Continuation
If the idle speed is not obtained:
-
Carry out adaptation of Engine Control Module (ECM) to throttle valve control module. See: Computers and Control Systems/Engine Control
Module/Testing and Inspection
-
Carry out road test.
Observe the valid safety precautions when carrying out a road test. See: Service Precautions/Technician Safety Information
-
Check DTC memory again.
-
Repeat idling check.
If the specified values are not obtained again:
-
Check throttle valve control module.
-
Check intake air system for unmetered air.
-
Check operating condition of engine. See: Computers and Control Systems/Testing and Inspection/Component Tests and General
Diagnostics/Engine Operating Conditions, Checking
-
Check signals from/to air conditioner. See: Computers and Control Systems/Testing and Inspection/Component Tests and General
Diagnostics/A/C Compressor Signal, Checking