Jetta V6-2.8L (AFP) (1999)
-
Pull locking cable out of steering lock -1-.
-
Press down sleeve on selector lever handle with two screwdrivers.
-
Pull selector lever handle off upward.
-
Remove center console and extension.
-
Remove locking cable from locking lever.
-
Press tabs of retaining clip together -arrows-.
-
Pull locking cable out of selector mechanism.
Installing
Note:
-
When installing ensure that the routing of the locking cable is correct.
-
Locking cable must not be kinked.
-
Adjust locking cable after installing.
-
Shift selector lever into "P" position.
-
Press locking cable into support bracket on selector lever housing until tabs on retaining clip -arrows- spring outward.
-
Attach locking cable in locking lever.
-
Turn ignition key to "ignition on" position.
-
Push locking cable into steering lock.
-
Push clip into locking cable.
Ensure that clip is properly located.
-
Adjusting locking cable.