Jetta V6-2.8L (BDF) (2002)
Indicated on display
-
Press keys O and 4 for function "Initiate basic setting" and confirm entry with Q key.
Indicated on display
-
Press keys 0, 0 and 1 for"Display group number 1" and confirm entry with Q key.
Indicated on display (1...4 = display zones)
Only continue with the test when
^
The coolant temperature is above 85°C -Display zone 2
-
Change to display group 70 as follows:
-
Press C key.
Indicated on display
-
Press keys 0, 7 and 0 for "Display group number 70" and confirm entry with Q key.
Note: The engine must not be loaded during this diagnosis, if this occurs the diagnosis will be interrupted and will not start again until the engine
is revved-up.