volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Battery Without Charge Indicator (Magic Eye), Checking|Page 5228 > < Battery Without Charge Indicator (Magic Eye), Checking|Page 5226
Page 10
background image

A battery is either faulty or in a low state of charge if the voltage measured during the load test drops quickly and falls below the specified voltage.

After performing the load test, a faulty battery will remain below the specified voltage and may only recover very slowly over a long period of time. The
no load voltage is never reached. See:  

Such batteries no longer have sufficient reserve and load capacity and must be replaced.

Low Maintenance Batteries, Checking

Low Maintenance Batteries With Charge Indicator (magic Eye) And Foil Sealed Cell Caps, Checking

Identification

-

Battery cell caps -2- covered with plastic foil.

-

Charge indicator -1- displays electrolyte level and charge condition.

NOTE:

-

As the charge indicator is located in a single cell, the indication is only valid for that cell. An exact assessment of battery condition should always
be confirmed by performing a load test. See:  

-

If the charge indicator on batteries in excess of 5 years old are colorless, DO NOT attempt to top and/or recharge battery. Battery must be
replaced.

-

Air bubbles that occur normally during battery charging (even during vehicle operation) may adversely affect charge indicator reading. To obtain
an accurate reading, gently tap the charge indicator with a screwdriver handle or rock the vehicle in order to displace any possible air bubbles that
have formed.

Charge indicator, readings

-

Green -> sufficient charge (and electrolyte level) OK

-

Black -> no charge or insufficient charge

-

Colorless or yellow -> critically low electrolyte level. Top up with distilled water immediately. See: Electrolyte Level, Checking (Batteries With
Charge Indicator) 

Visual check

Always perform a visual check of the battery before checking no load voltage, electrolyte specific gravity and load test.

Check for:

-

Cracked battery case and resulting corrosion damage to surrounding area.

-

Loose, damaged or corroded battery posts and terminals.

WARNING!

-

Ensure that all battery post/terminal connections are securely installed and tightened according to the torque value specified.

-

Intermittent contact at battery terminals may spark or cause electrical system malfunctions.

Maintenance Free Batteries, Checking

Maintenance Free Batteries With Charge Indicator (magic Eye) Without Cell Caps, Checking

Battery Without Charge Indicator (Magic Eye), Checking|Page 5228 > < Battery Without Charge Indicator (Magic Eye), Checking|Page 5226