Jetta V6-2.8L (BDF) (2002)
/Page-1179001.png)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal, Removing and Installing
Clutch pedal, removing and installing
Special tools and equipment
^
T10005 Pliers
^
VAG1331 Torque wrench
Removing
^
Turn clutch pedal switch 45° to the left and pull out from support.
^
Remove overcenter spring.
^
Separate clutch pedal from clutch master cylinder and push operating rod toward engine compartment onto stop.
^
Remove nut -A-.
^
Pull bolt out until the clutch pedal can be removed.
Installing
Installation is carried out in the reverse sequence, when doing this note the following:
