Jetta V6-2.8L (BDF) (2002)
Fig. 16 Positioning spacer sleeve toward 5th gear locking collar/synchro-hub
Lugs (arrow -1-) of spacer sleeve must line up with recesses in synchro-hub (arrow -2-).
Lock pieces (arrow -3-) must rest on collar of spacer sleeve.
Fig. 17 Pressing on 5th gear locking collar/synchro-hub together with spacer sleeve
Fig. 18 Pressing on tapered roller bearing inner race
^
Determine securing clip, Refer to Fig. 19 and install it.
Fig. 19 Determining thickness of circlip
^
Determine thickest circlip which will still fit and install it.
The following securing clips are available: