Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
/Page-2015002.png)
-
Unclip cable guide - 1 - using a flat screwdriver - 2 -, remove bracket - 3 - in direction of - arrow - and unhook cable hook - 4 -.
-
Disconnect harness connectors.
Installing
-
Remove window recess seal - 1 - from door trim and insert in window recess.
-
Remainder of installing is reverse of removing.
NOTE:
-
Before installing door trim, check clips and replace if necessary, and insert into mounts of door trim.
-
After connecting battery, check vehicle equipment (radio, clock, electric windows) as per Repair Manual and/or Owners Manual.
-
If engine Electronic Control Module (ECM) is subject to low voltage with ignition on, DTC memory and Readiness code must be checked
