volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Power Trunk / Liftgate Lock Actuator > < Side Window Removal and Installation|Page 8380
Page 4
background image

Touching Up Paint Damage

Paint composition is to be restored and corrosion protection measures performed according to specification.

The following repair method is suitable for paint finish damaged in a zone which is not visible:

-

Paint over twice (wet-on-wet) with glass/paint primer D 009 200 02. Air drying time = approx. 10 minutes.

Cleaning Off Surplus Adhesive Sealing Material

It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Application of this product requires conformance with safety
precautions.

WARNING:  Glass which has just been installed should not be pressed outward while cleaning from inside the vehicle.

-

Clean painted surface roughly with a dry cloth. Remove remaining adhesive with adhesive remover D 002 000.10.

Cleaning plastic trim

Allow adhesive sealing material to cure (approx. one hour) and then peel off.

Power Trunk / Liftgate Lock Actuator > < Side Window Removal and Installation|Page 8380