Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
/Page-2111001.png)
Power Trunk / Liftgate Lock Switch: Service and Repair
Trunk Release Button
Removing
-
Remove rear lid trim.
-
Unclip harness connectors -1- and -2- from retainers and disconnect harness connectors.
-
Unclip operating rod (arrow) at lock cylinder.
-
Remove lock cylinder securing bolts -1- and remove lock cylinder upward.
-
Remove securing bolts for trunk release button (arrows) and remove button upward.
Installing
Installation is in reverse order of removal.
