Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
Heater Core: Service and Repair
Heater Core, Removing And Installing
Removing:
Special tools, testers and auxiliary items required
-
Drip tray for VAS6100 VAS 6208
-
Hose clamps, up to 40 mm. 3093
-
Compressed air gun, commercially available
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove facing wall in plenum chamber
-
Place Drip tray for VAS6100 VAS 6208 under the engine.
CAUTION:
-
Scalding danger.
-
The cooling system is pressurized when the engine is warm. Wear gloves and other protection and carefully release system pressure if
necessary before performing repairs.