Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
-
Remove sealant residue on oil pan using a hand drill with a plastic brush (wear protective glasses).
-
Clean sealing surfaces of oil and grease.
Installing
Note:
^
Note "use by date" on sealant container.
^
Oil pan must be installed within 5 minutes after applying the silicone sealing compound.
-
Cut off tube nozzle at forward mark (approx. 3 mm dia.).
-
Apply silicone sealing compound as shown to the clean oil pan sealing surface.
^
Bead must be 2 to 3 mm thick.
^
Bead must run on the inside of the bolt holes (arrows).