Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
-
Install 2036 adjustable rod and adjust mountings to height of studs.
-
Remove valve springs with VW 541/1A lever and VW 541/5 press piece.
Note: The valves are supported by the piston crown.
-
Remove valve stem seals using 3047A.
Installing
-
Place supplied plastic sleeve -A- on appropriate valve stem. This prevents new valve stem seal -B- from being damaged.
-
Insert new valve stem seal in 3129 installation tool.
-
Lubricate valve stem seal sealing lip with oil and press carefully onto valve guide.
-
Install camshaft.