Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
/Page-1697001.png)
Compressor Clutch: Testing and Inspection
Clutch Plate Gap (Zexel), Checking
Clutch plate gap, checking
-
Check gap with feeler gauge.
-
Gap: 0.3 - 0.6 mm (0.0118 - 0.0236 in.)
NOTE:
-
Gap must be within tolerance around entire circumference.
-
If gap is outside tolerance range, remove clutch plate and adjust gap by adding or removing shims item.
