Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
/Page-394001.png)
Alignment: Service and Repair
Camber, Adjusting, Front Wheel
Front wheel camber, adjusting
Camber cannot be adjusted
If vehicle is out of specification, check trim height and balance if necessary
By adjusting sub-frame it is possible to bring camber within tolerance.
-
Loosen bolts -1- and -2-.
-
Move sub-frame to equalize camber on both sides.
-
Check caster; caster can also change when moving sub-frame.
NOTE: Always replace sub-frame bolts (one at a time) when making this type of adjustment.
Tightening torque
Support to body 100 Nm (74 ft. lbs.) + turn 90°
Bolt position -1-
Use new bolts!
Support to body 100 Nm (74 ft. lbs.) + turn 90°
Bolt position -2-
Use new bolts!
