Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
/Page-414003.png)
-
Turn crankshaft to cylinder 1 TDC (vehicles with automatic transmission).
Note:
-
To turn the engine over by hand, use the lever-camber adjustment 3098 and place it on the power steering pump.
With engine removed:
Vehicles with manual transmission
-
Fasten adjustment gauge 2068 A as shown.
-
Set adjustment gauge to 96 mm ( arrow A ). The left notch of vernier scale is reference point.
-
Turn crankshaft until flywheel TDC marking aligns with point on setting device ( arrow B ).
Vehicles with automatic transmission
