Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
/Page-1534001.png)
Fuse Block: Service and Repair
Fuse Holder, Removing and Installing
Fuse Holder And Relay Carrier
CAUTION!
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.
Fuse Holder, Removing And Installing
-
Carefully pry-off side cover from instrument panel (left).
-
Remove driver's side instrument panel trim.
-
Remove screws -B- (2 Nm) and then press locking device -C- when doing this pull fuse holder -A- out inward.
