Jetta GL L4-1.9L DSL Turbo (ALH) (2001)
-
Remove pump.
Installing
-
Fill power steering pump with hydraulic oil, via suction union.
-
Turn hub by hand until oil comes from pressure side.
-
Install power steering pump on bracket and tighten bolts to 25 Nm (18 ft. lbs.).
-
Install suction hose and spring clip.
^
(Arrow A) must align with casting seam -arrow-.
^
Spring clip must close off mark -arrow B-.
-
Install new O-rings on banjo bolt.
-
Tighten banjo bolt to 30 Nm (22 ft. lbs.).
Continue installation in reverse sequence