volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Molded Headliner, Removing and Installing (Vehicles With Sunroof)|Page 8440 > < Molded Headliner, Removing and Installing (Vehicles With Sunroof)|Page 8438
Page 1
background image

Headliner: Service and Repair
Molded Headliner, Removing and Installing (Vehicles Without Sunroof)

Molded Headliner, Removing And Installing (Vehicles Without Sunroof)

CAUTION:  Disconnect battery ground strap before working on electrical system.

NOTE:

-

Slight changes may have to be made to removal and installation procedures, depending upon equipment installed in vehicle.

-

Before disconnecting battery see note concerning coding in Owners Manual for radio.

-

Obtain radio anti-ft code before disconnecting battery.

Removing

-

Switch ignition off.

-

Remove upper A pillar trim:
-

with side curtain protection.

-

without side curtain protection

-

Remove upper B-pillar trim:
-

with side curtain protection --> 04.01.

-

with side curtain protection 05.01 -->.

-

without side curtain protection.

-

Remove roof end strip:
-

Golf.

-

Golf wagon/Jetta wagon .

-

Loosen upper C-pillar trim:
-

Golf with side curtain protection.

-

Golf without side curtain protection.

-

Jetta with side curtain protection.

-

Jetta without side curtain protection.

-

Golf wagon/Jetta wagon with side curtain protection --> 04.01.

-

Golf wagon/Jetta wagon with side curtain protection 05.01 -->.

-

Golf wagon/Jetta wagon without side curtain protection.

-

Remove upper D-pillar trim (Golf wagon/Jetta Wagon).

-

Remove sun visor.

-

Remove grab handle (roof)

-

Remove door inner seals at top.

-

Unclip trim - 1 - in direction of - arrow - and remove.

Molded Headliner, Removing and Installing (Vehicles With Sunroof)|Page 8440 > < Molded Headliner, Removing and Installing (Vehicles With Sunroof)|Page 8438