Jetta GLS L4-1.8L Turbo (AWD) (2001)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor on Front Axle
Note: Removing and installing ABS system components is identical for FS III and FN 3 brake calipers.
1
ABS wheel speed sensor
^
Before inserting sensor, clean mounting hole inner surface and coat with lubricant, G 000 650
2
Wheel bearing housing
3
Hex socket head bolt, 8 Nm (70 inch lbs.)
4
Splash shield
5
Hex bolt, 7 Nm (62 inch lbs.)
6
Wheel bearing
^
Replace each time after removing
7
Screw
8
Brake disc
9
Wheel hub with ABS wheel speed sensor rotor
^
Pressing out and in
10
Circlip
Wheel speed sensor for front axle, removing and installing
Removing
^
Raise vehicle.