Jetta GLS L4-1.8L Turbo (AWD) (2001)
Ribbed Belt: Procedures
Ribbed Belt, Removing And Installing
NOTE:
-
Always replace ribbed belt if found to be faulty. This will avoid related break-downs or operating problems.
-
If a used ribbed belt is to be reused, mark direction of rotation before removing. When installing used ribbed belts observe the direction of rotation
marked on removal. Installing opposite to the direction of rotation leads to belt damage
-
It is not necessary to adjust the ribbed belt tension, as a spring loaded tensioner guarantees the best possible belt tension
Preparation, all engines
-
Remove securing bolts -arrows- and remove the middle cover of the engine compartment noise insulation.
-
Remove hex nut, unclip securing clips -arrows- and remove right-hand engine cover of the compartment noise insulation.
Ribbed Belt, Removing (1.8L & 2.0L 4- Cylinder Gasoline Engines With Power Steering Pump And A/C Compressor)
Special tools, testers, measuring instruments and auxiliary items required