volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Camshaft Position Sensor > < Brake Signal|Testing and Inspection|Page 2932
Page 3
background image

-

Connect test box VAG 1598/31 to control module wiring harness. The engine control module remains disconnected.

-

Check wiring for open circuit between test box and 4-pin connector for open circuit using wiring diagram.
Contact 3 + socket 55
Contact 4 + socket 56
Wire resistance: Max. 1.5 ohms

-

Additionally check wires for short to one another.

-

Additionally check wiring for short to battery positive or Ground.

Camshaft Position Sensor > < Brake Signal|Testing and Inspection|Page 2932