Jetta GLS L4-1.8L Turbo (AWD) (2001)
/Page-802004.png)
-
Press seal in onto stop with press sleeve 3241/1 and bolt 3241/3.
Continued for all seals
-
Insert Hall sender hood into notch in inlet camshaft.
-
Install washer (taper facing outwards) and tighten securing bolt to 25 Nm.
-
Install housing for Hall sender and tighten to 10 Nm.
-
Install upper toothed belt guard.
-
Reconnect connector on Hall sender-arrow-.
