Jetta GLS L4-1.8L Turbo (AWD) (2001)
-
Turn tightening device in direction of arrow to relieve tension on ribbed belt.
-
Mark direction of ribbed belt rotation.
-
Remove ribbed belt.
-
Remove belt pulley hex bolt.
-
Clamp off suction hose with hose clamps -3094-.
-
Open spring clip -3- and pull off suction hose with special tool VAS 5024.
-
Remove banjo bolt -4-.
-
Seal pressure line/hose with a plastic bag or similar.
-
Remove hex bolts -1- and -2-.
-
Remove pump.
Installing
-
Fill power steering pump with hydraulic oil, via suction union.
-
Turn hub by hand until oil comes from pressure side.
-
Install p/s pump on bracket and tighten bolts to 25 Nm (18 ft. lbs.).