Jetta GLS L4-1.8L Turbo (AWD) (2001)
/Page-1619002.png)
-
Pull connector -1- off speed sensor.
-
Unclip speed sensor wiring from retainer.
-
Remove bolts -1- with vehicle standing on its wheels (raise vehicle until bolts are accessible).
-
Raise vehicle to relieve pressure on coil spring.
-
Remove spring.
Installing spring
-
Ensure spacer bushing (zinc) is not damaged. Replace if necessary.
-
Install spring together with spring seat.
-
Loosen spring and remove spring compressor. Observe installation position!
