Jetta GLS L4-1.8L Turbo (AWD) (2001)
1. Circlip
-
Mark after removing and insert in same position
2. Thrust plate
-
Smooth side facing inner plates
3. Inner plate
4. Outer plate
5. Corrugated washer
6. Circlip
-
Removing and installing see Fig. 1
-
Installation position see Fig. 2
7. Spring supporting plate
-
With springs
-
Installation position see Fig. 2
8. Spring supporting ring
9. Piston
-
Sealing lips are vulcanized to piston
-
Moisten sealing lips with ATF before installing
-
Turn piston slightly when installing
10. Clutch housing