Jetta GLS L4-1.8L Turbo (AWD) (2001)
-
Remove sound insulation tray-arrows-.
-
Remove right sound insulation.
-
Turn steering to right onto full lock stop.
-
Disconnect drive shaft from flanged shaft.
-
Raise right drive shaft and secure.
-
Remove flange shaft securing bolts by threading two bolts into flange and counterhold flange shaft using a lever.
-
Place drip tray under transmission.
-
Remove flanged shaft with spring.
-
Pull flange shaft oil seal out using VW 771 and VW 771/37.
Installing right-hand flange shaft seal
-
Drive in new seal until thrust piece contacts stop. Ensure that seal remains straight when driving.
-
Insert flange shaft.
-
Apply sealant D 176 404 A2 to head of countersunk bolt.
-
Secure flange shaft with countersunk bolt.
-
Bolt right-hand drive shaft to flange shaft.
-
Check and top up ATF level with transmission installed.