Jetta GLS L4-1.8L Turbo (AWD) (2001)
/Page-1240006.png)
Fig. 9 Installing valve body
-
Route conductor strip as illustrated. When installing do not kink or twist.
Fig. 10 Installing ATF screen
-
Before installing ATF screen insert seal in valve body.
-
Firmly press ATF screen onto valve body.
Fig. 11 Installing securing clip with bolt for conductor strip connector
-
Connect conductor strip connector to lower retainer.
-
Fit upper retainer with recess (arrow) onto connector tab.
-
Tighten bolt to 20 Nm.
