volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Output Shaft, M/T > < Fluid - M/T|Capacity Specifications|Page 4843
Page 1
background image

Fluid - M/T: Testing and Inspection

5 Speed Manual 02J

Gear oil, checking

Gear oil specification. Refer to Specifications
-

Remove insulation tray below engine/transmission, if fitted.

Fill Plug Location 5 Speed Manual 02J

-

Remove plug (arrow) to check oil
The oil level is correct when the transmission is full to the lower edge of the filler hole.

-

Install plug (arrow).

Adding Transmission Oil 

-

Remove plug (arrow).

-

Top up oil to lower edge of filler hole.

-

Install plug (arrow).

-

Start engine, engage gear and allow transmission to turn for approx. 2 minutes.

-

Switch off engine and remove plug (arrow).

-

Top up oil to lower edge of filler hole again.

-

Install plug (arrow).

Output Shaft, M/T > < Fluid - M/T|Capacity Specifications|Page 4843