Jetta GLS L4-1.8L Turbo (AWD) (2001)
WARNING!
Always wear protective goggles and leather gloves.
-
Cover areas of body and interior to protect against damage from glass splinters.
-
Remove pieces of glass up to adhesive sealing material.
-
Disconnect wiring connectors for heated rear window and antenna.
-
Cover flange -2- all around with textile reinforced adhesive tape.
-
Cut through adhesive sealing material (with remainders of glass) in window opening with electric cutler and blade VAG 1561/10 (with stop roller).
Rear Window, Installing
Preparing old undamaged window for glazing See: Related Information For All Flush Bonded Windows/Preparing Removed Undamaged Window For
Installation
Preparing new window for glazing See: Related Information For All Flush Bonded Windows/Preparing New Window For Glazing
Preparing body flange for glazing See: Related Information For All Flush Bonded Windows/Preparing Body Flange For Glass Installation
Installation instructions See: Related Information For All Flush Bonded Windows/Installation Instructions
Curing time See: Related Information For All Flush Bonded Windows/Curing Time