Jetta GLS L4-1.8L Turbo (AWP) (2002)
^
Can be replaced individually
^
Checking shock absorber for leaks and noises
^
Disposal -follow environmental codes
13. Buffer stop
14. Protective sleeve
Suspension Strut Removal and Installation
Removing
-
Remove wheel.
-
Remove bolts -2- from brake caliper.
-
Remove brake caliper and hang or secure on body. Do not hang from brake hose.
-
Remove coupling link from control arm.
-
Release speed sensor wiring from suspension strut.
Right suspension strut
NOTE: If right suspension strut is to be removed additional work is required
-
Remove noise insulation.
-
Disconnect axle shaft from transmission drive flange.
Following work sequence applies to both sides
-
Remove bolt and separate wheel bearing housing/suspension connection.