Jetta GLS L4-1.8L Turbo (AWP) (2002)
-
Fold down - arrow - center sun visor -1 -.
-
Remove screw - 2 - out of roof sidemember - 3 - and remove sun visor.
-
Insert protective foil - 1 - V.A.G1474/8 between windshield and instrument panel.
-
Loosen sealing lip in upper area of windshield using a plastic wedge and spray in Cleaning solution D 009 401 04 (as a substitute for lubricant).
-
Insert cutting cord - 2 - into window flange using small tube.
-
For very narrow gap dimensions, guide cutting cord from outside and press under lip using plastic wedge.
-
Push cutting cord end through adhesive sealant into vehicle interior using awl (from V.A.G1474A).
NOTE: In side area of window, guide awl through adhesive sealant as close as possible to window flange on body, so as not to damage sealing
lip.
-
Secure one cord end to Spooling tool V.A.G 1654 A.
-
Pull through second cord inward and attach grip from V.A.G1351 to counterhold.
-
Set Spooling tool V.A.G1654 into "Position I".
-
Move spooling tool according to position required and cut windshield free.
-
While cutting free, press cutting cord against window using plastic wedge in order to have clearance from window flange and instrument cluster.