Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
-
Pull operating lever -1- in direction of arrow.
-
Tension spring -2- on door lock in direction of arrow with a screwdriver and hook notch on locking lever into spring.
NOTE: Hooking the operating lever locks the mechanism. The incorrect attachment of the bowden cable later is thus prevented.
-
Install assembly carrier in door.
-
Install all bolts. Tighten bolts marked -1- and -2- (image above) in prescribed sequence. Tightening torque: 8 Nm (70 in. lb).
NOTE: The remaining bolts can be tightened in any sequence.
-
Press door window glass -3- into window guide (arrow and tighten clamps with bolts -4- to 10 Nm (7 ft lb).
-
Remaining installation is in reverse order of removal.
-
Perform functional check of door lock.