Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
-
Pull operating lever - 1 - in direction of - arrow -.
-
Using a screwdriver, tension spring - 2 - secured to door lock in direction of - arrow - and engage lock lever into spring.
NOTE: Lock is secured by engaging operating lever. Thereby later incorrect clipping-in of Bowden cable is prevented.
-
Thread in electrical wire through boot into door and secure clips in door plate.
-
Insert carrier assembly into door.
-
Tighten all bolts. Tighten bolts marked - 1 - and - 2 - in specified sequence.
Tightening torque: 8 Nm
-
Remaining bolts can be tightened in any sequence.
-
Installing door window, see installing door window to window regulator.