Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
Hood Latch Release: Service and Repair
Release Lever, Interior
Removing
-
Pull release lever -1- approx. 2 cm (0.8 in.).
-
Insert small screwdriver into gap between lever -1- and clip -2-.
-
Let go of lever and pry clip off (clip falls behind trim).
-
Unclip trim -3- from bracket at center and from sill panel.
Installing
-
Clip trim -3- into sill trim first.
-
Press upper clip into lever bracket.
-
Push clip -2- into release lever.
-
Press release lever onto mounting in lever bracket.
-
Before closing hood perform a functional check of release lever and bowden cable.