Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
-
Install coil on compressor.
-
Position pin -A- in recess
Clutch Plate Gap, Checking
A/C Clutch - N25- (Zexel), Servicing
Clutch plate gap, checking
-
Check gap with feeler gauge.
-
Gap: 0.3 - 0.6 mm (0.0118 - 0.0236 in.)
NOTE:
-
Gap must be within tolerance around entire circumference.
-
If gap is outside tolerance range, remove clutch plate and adjust gap by adding or removing shims item.