Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
-
Remove screws -arrows-.
-
Remove center trim.
-
Remove controls with cables attached.
-
Disengage cables from controls.
-
Disconnect electrical connectors.
After removing controls, check all cables for free movement.
-
Move cables back and forth in direction of arrows.
-
Replace cables that are damaged or hard to move.
Installing
NOTE:
- Cable sleeve ends are color coded.
- All air flaps must audibly move onto end stops when turning controls.
- Always check cables before installing. Replace binding or damaged cables.