Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
-
Unfasten and remove engine support at cylinder block - arrows -.
Note:
-
To loosen both upper engine support bolts, the engine must be raised slightly with the engine support bridge.
-
To loosen the lower engine support bolt, the engine must be lowered slightly with the engine support bridge.
-
Remove vibration damper/belt pulley.
-
Remove lower and middle toothed belt cover.
-
Mark direction of rotation of toothed belt.
-
Remove toothed belt.
INSTALLTION
-
Verify that the TDC mark on flywheel and reference mark are aligned.
-
Loosen camshaft sprocket bolt by one revolution. To loosen bolt, counterhold camshaft sprocket using counter holder 3036.
Note:
-
When loosening and tightening the camshaft sprocket, never use the camshaft bar T10098 to counter-hold! Use the counter-holder 3036.