Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
Indicated on display:
Read Measuring Value Block HELP
Enter display group number XXX
-
Using the Scan Tool (ST) button pad, enter the required display group number (following example shows display group 001).
-
Press -Q- button to confirm input.
Indicated on display: (1...4 = Display fields)
Read Measuring Value Block 1
->
1
2
3
4
-
Displayed after pressing C button.
Indicated on display:
Read Measuring Value Block HELP
Enter display group number XXX
-
Enter alternate display group number as needed See tables beginning, See: Scan Tool Testing and Procedures/Measuring Value Blocks (Function
08)/Interpreting Display Groups
NOTE:
-
Display fields always show actual values transmitted from senders and sensors. However, instrument cluster display values can differ from those in
the display fields due to internal filtering.
-
Other display groups are possible, but are not required for On Board Diagnostic program!
-
Display fields in display groups 125 and 126 provides the CAN-Bus function status codes of various control modules connected to the
"Powertrain" CAN-Bus network.
-
If a vehicle is not equipped with control module(s) listed in the following display groups, the applicable display field remains blank. Check correct
coding of CAN-Bus On Board Diagnostic (OBD) interface -J533-. See: Programming and Relearning
-
Display field content differs between VDO and MMO instrument clusters!