Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
^
Using extractor tool from wiring harness repair set VAS 1978, push out applicable terminals.
^
Disconnect wheel speed sensor wiring connector.
^
Replace faulty wheel speed sensor wiring.
^
Connect speed sensor to speed sensor wiring.
^
Secure speed sensor wiring (arrows).
Note: Make sure the wiring is not twisted in the wheel well.
^
Install pin connectors in connector housing.
^
Using installation tool from VAS 1978, push individual wire seals to stop.
^
Secure terminals by engaging purple latch and install cover of multi-pin connector.