Jetta GLS L4-1.9L DSL Turbo (ALH) (2001)
Installing and adjusting multi-function TR switch
-
Install multi-function TR switch -F125- on selector shaft.
Installation position: The groove -1- in the selector shaft must align with the multi-function TR switch -F125- marking -2-.
-
Screw in multi-function TR switch -F125securing bolts (arrows) hand tight.
-
Place adjusting device on selector shaft and secure.
-
Shift lever/selector shaft on transmission to position "N".
-
Turn switch until hole on switch housing -1- aligns with hole of adjusting device.
-
Insert pin -2- from adjusting device.
-
Tighten multi-function TR switch -F125- securing bolts (arrows) to 6 Nm.
Further installation in reverse order
-
Check selector lever cable adjustment, Refer to Transmission and Drivetrain.
-
Enter radio code.