Jetta GLS V6-2.8L (AFP) (2002)
-
Remove seal using wedge 3409.
Installing
-
The surface of the piston and seal must only be cleaned with methylated spirits and then dried.
-
Apply a thin coat of assembly lubricant G 052 150 A2 to piston and seal before inserting.
-
Place protective seal with the outer sealing lip on the piston.
-
Using wedge 3409, insert the inner sealing lip into the grove in the cylinder.
Note: Hold piston in front of caliper housing.
-
Screw piston into housing by turning knurled wheel clockwise.
Note: