volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Ignition System > < With Manufacturer's Scan Tool|Page 3737
Page 3
background image

-

Check wire between test box socket 121 + 2-pin connector terminal 2 for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohm

Continuation for all vehicles

-

Also check the wire for short circuit to B+ and Ground (GND).
Specified value: infinite Ohm

-

Check wire between 2-pin connector terminal 1 and the Fuel Pump (FP) Relay -J17- for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohm

If no malfunctions are found in wires:

-

Replace Motronic Engine Control Module (ECM) -J220-.

Ignition System > < With Manufacturer's Scan Tool|Page 3737