Jetta GLS V6-2.8L (AFP) (2002)
/Page-1220008.png)
Fig. 12 Pulling tapered roller bearing outer race out of transmission housing
A - Counter support, e. g. Kukko 22/2
B - Internal puller 46 to 58 mm, e.g. Kukko 21/7
Fig. 13 Outer race/tapered roller bearing installation position in clutch housing
^
Transmissions from 06 04 0
^
The recesses for locking plate (Refer to Fig. 14) on outer race/tapered roller bearing -arrow A- and clutch housing -arrow B- must align.
Fig. 14 Pressing in tapered roller bearing outer race
^
Transmissions from 06 04 0
^
After pressing in, check if the locking plate -A- can be inserted in the recess.
